What is Plasma Bio-filler?
A plasma bio-filler extracts plasma from a litigant’s blood, and then made plasma liquid to gel, then injects it into the body.PPP filling technology is made by the plasma that extracts from a litigant’s blood into a gel and then injects it into the body. During the process, our model TDD-4MC is the important equipment to make blood plasma into autologous collagen, TDD-4MC adopts advanced cooling and heat system, it can control the temperature accurately, and the autologous collagen made by TDD-4MC replaced the high-cost filler. With good features of no toxic and no side effects, at the same time, can extract PRP (Platelet Rich Plasma) inject into the dermis, promote skin recovry, help to eliminate wrinkles, enhance the face, shrink pores, tender skin, etc.
Technical parameters of TDD-4MC Plasma (PPP) Biofiller Gel Maker
|
Name |
Plasma Bio-filler Gel Maker |
|
Model |
TDD-4MC |
|
Display |
Digital display |
|
Temperature Range |
RT~+90℃ |
|
Capacity |
10 syringes |
|
Power |
45W 220V 50Hz or 110V 60Hz |
|
Dimension |
25×25×14（cm） |
|
Weigh |
5.26Kg |
|
Warranty |
13 month |
Application of TDD-4MC Plasma (PPP) Biofiller Gel Maker
1. Fill all kinds of wrinkles and add volume and smooth out the deep creases and wrinkles in the face
2. Solve the check depression and augment cheeks to enhance youthfulness
3. Plumping thin lips and Nose reshaping
4. Modify the chin outline
5. Nose re-shaping
6. Improve the profile of body part
7. Reduce fine lines around the neck
8. Reduce or remove eye-bags
9. Improve the appearance of recessed scars
10. Enhance shallow contours
Advantages of filling by PPP autologous collagen
1. Ideal effect: the autologous collagen can promote the cell’s growths, and keep the skin elasticity.
2. Long time maintaining: Inject once time maintains for 4-7 months.
3. Safety: it’s extracted from the body, it’s very safe. And Rejection Reaction
4. Low cost: Extract from own body and save much cost.
How to make PPP autologous
Step 1: Blood collection
Step2: Blood separation by centrifuge
Step 3:PPP collection
Step 4:Heat PPP at 75 ℃ for 5 -8mins
(Note: please pre-heat to75 ℃ before putting syringes into)
Step 5: Put PPP into cooling holes for 5 mins., the PPP gel make finished.
Step 5: Inject the PPP gel into the needed place
PPP gel makes the process
Note:
- This machine is only for PPP gel make, should be used together with our centrifuge
- During operation, don’t need to add anything else (such as PRP).
- Suggest don’t use PRP to make Gel, because it is easy to inactivity.
