PM6000 Patient Monitor
The PM6000 is a cost-effective, multi-parameter patient monitor, providing a reliable measurement of patients’ SpO2, pulse rate, non-invasive blood pressure, temperature, 5-lead/3-lead electrocardiography (ECG), and respiration rate. Integrated sidestream technology ensures that the monitor can be used with intubated and non-intubated patients. 12.1 inches display assures easy viewing of waveforms, numeric values, and on-screen trending data for demanding facilities.
Features of PM6000 Patient Monitor
- 12.1″ large-sized screen, anti-dazzle with 4° incline.
- Integrated module designs ensure the product’s safety, stability, and durability.
- Wide-angle alarms indicator makes patients safer.
- Multiple display modes: OxyCRG, Trend table, Trend graph, etc.
- Advanced patient information management system.
- Review trend data at any time for any patient by inputting patient ID or name.
- Connect with a central monitoring system for the remote and wireless monitor.
- High capacity storage, power-off data protection.
- 3-level visual/audio alarms and alarm events can be stored and reviewed.
- Support slot interfaces: Network, Wi-Fi
SPECIFICATIONS of PM6000 Patient Monitor
Enclosure
|
Weight |
4.85kg (10.69 lb), including 1 battery |
|
Dimensions |
324mmW x 324mmH x l55mmD (12.76in. W x 12.76in.H x 6.10in. D) |
|
Display |
|
|
Screen size |
3073mm(12.1 in.), measured diagonally |
|
Screen type |
TFT LCD, white LED backlight,viewing cone of 60°and optimal viewing distance of 1 meter |
|
Resolution |
800x600pixels |
|
Alarms |
|
|
Categories |
Patient status and system status |
|
Priorities |
Low, medium, and high |
|
Notification |
Audible and visual |
|
Setting |
Full storage, low battery and sensor off |
|
Alarm volume level |
45 to 85 decibels |
|
Alarm system delay |
<10seconds |
SpO2
|
Aturation range |
1% to100% |
|
Accuracy |
70-100% ±2%), <70%undefined |
|
Resolution |
1% |
|
Display sweep speed |
10.00 mm/sec |
Pulse Rate
|
Aturation range |
25bpm to250bpm |
|
Accuracy |
±2bpm/±2% take maximum |
|
Resolution |
1bpm |
ECG
|
Aturation range |
25bpm to250bpm |
|
Accuracy |
±2bpm/±2% take maximum |
|
Resolution |
1bpm |
|
Leads |
Ⅰ,Ⅱ,III,V,aVR,aVL or aVL |
|
Display gain |
X1/4,X1/2,X1,X2,X4 |
|
Display sweep speed |
6.25, 12.5, 25, 50mm/sec |
NIBP
|
Method |
Oscillometric |
|
Aturation Range |
0-300mmHg |
|
Accuracy |
Based on ANSI/AAMI SP10:1992 and 2002 Standards |
|
Measurement Time |
3O-5Os typical, 180s maximum |
|
AUTO Interval Times |
2, 3, 5, 10, 30 min, or 1, 2h |
RESP
|
Aturation range |
0-130rpm |
|
Accuracy |
±1 pm |
|
Resolution |
1rpm |
TEMP
|
Aturation range |
0-50°C |
|
Accuracy |
±0.2°C |
|
Resolution |
0.1°C |
ETCO2 (Optional)
|
Mode |
Sidestream or Mainstream |
|
Aturation Range |
0-150mmHg |
|
Accuracy |
0-40mmHg ±2mmHg 41-150mmHg±10%of reading |
|
Resolution |
0.1mmHg |
|
Flow rate |
50ml/min ±10ml/min |
Electrical
|
Battery |
Four new lithium batteries with 4,400mAh will typically provide 4.5 hours of monitoring with no external communication, no audible alarm sound, and at an ambient temperature of 25°C |
|
Type |
Lithium Batteries, 4,400mAh, DC 11.IV |
|
Voltage |
AC 100-240V, 50-60HZ, 80VA |
Environmental
|
|
Transport and Storage |
Operating Conditions |
|
Temperature |
-40°C to 75°C (-40°F to 167°F) |
0°C to 50°C (32°F to 122°F) |
|
Altitude |
-500 to 5,000m (-1,640 to 16,404ft.) |
|
|
Relative humidity |
15%to95%noncondensing |
|
Trend
|
|
Tabular |
|
Memory |
Saves a total of 120 hours of data events; saves date and time, alarm conditions, measurements |
|
Tabular format |
One table for all parameters |
Configuration
|
Standard |
SpO2+ECG+NIBP+RESP+TEMP |
|
Optional |
Sidestream/Mainstream ETCO2 Module, Trolley, Recoder, Brace, IPMS8600 Central monitoring system |
ACCESSORIES
