News
Be Careful! Improper Operation of The Autoclave Can Be Dangerous
High-pressure reactors are commonly used high-pressure equipment in scientific research laboratories. If used improperly, it will cause serious safety hazards and even cause accidents. Autoclave accidents generally include explosion, leakage, explosion, etc. Once the autoclave body ruptures, debris splashes, and the medium escapes, it will cause major damage to personnel, experimental equipment, and equipment. This article…
How To Adjust The Absorption Sensitivity of Atomic Absorption Spectrophotometer?
Atomic absorption spectrophotometer (hereinafter referred to as AAS) will decrease in sensitivity after using it for some time. This will directly lead to an increase in the detection limit of the instrument, even exceeding the requirements of the verification regulations, so it is judged to be unqualified. The following takes flame atomization atomic absorption as…
How To Maintain A Benchtop High Speed Refrigerated Centrifuge?
Introduction of High Speed Benchtop Refrigerated Centrifuge The high-speed benchtop refrigerated centrifuge is a device used for refrigerated centrifuge, which is an important tool for separation in the fields of medicine, life science, and agricultural science. This machine can be equipped with different kinds of rotors, which can largely meet the requirements of various scientific research experiments. In…
An Article To Quickly Learn Benchtop Refrigerated Centrifuge
The refrigerated centrifuge is a specialized device that uses centrifugal force to separate precipitated mixed liquids, including solids. Centrifuges commonly used in laboratories include high-speed and low-speed refrigerated centrifuges, benchtop high-speed refrigerated centrifuges, micro high-speed refrigerated centrifuges, and multipurpose refrigerated centrifuges. This article mainly introduces the reasons for the emergence of refrigerated centrifuges and the different types of benchtop…
9 Questions You Most Care About Laboratory Analytical Balances
The balance is a commonly used equipment in the laboratory. Have you ever had this or that doubt in your daily operation? Today, let’s take a look at the “Nine Questions of Laboratory Analytical Balances”. 1. Does the laboratory have to build a special balance room to hold the one thousandth analytical balance? The environmental conditions…
How to Correctly Read the Information Displayed on the Patient Monitor?
As we all know, a monitor is a medical device commonly used in disease treatment. It continuously monitors the patient’s physiological parameters during use, detects changing trends, and can alarm and remind abnormal monitoring signals to point out critical situations for doctors’ emergency treatment and treatment. Whether it is a patient or a family member, it…
What is GCMS (Gas Chromatograph and Mass Spectrometry)?
GCMS (Gas Chromatograph and Mass Spectrometry) is widely used in the separation and identification of complex components, which has a high resolution of GC and the high sensitivity of mass spectrometry. GCMS is mainly composed of the following parts: chromatographic, gas interface, mass spectrometer part (ion source, mass analyzer, detector), and data processing system. Gas-mass spectrometry (GCMS) is…
Learn About Lab Freeze Dryer in 8 minutes
A freeze dryer is a technical method that pre-freezes water-containing items, and then sublimates its moisture in a vacuum state to obtain dry items. The freeze-dried articles are easy to be stored for a long time and can be restored to the state before freeze-drying and maintain the original biochemical properties after adding water. Vacuum freeze-drying technology…
Troubleshooting of High Performance Liquid Chromatography (HPLC)
There are many test instruments used in the laboratory, and high-performance liquid chromatography (HPLC) is one of them. The instrument is based on classical chromatography, citing the theory of gas chromatography, and technically it changes the traditional mobile phase to high-pressure delivery. This article will introduce the principle and application, characteristics, failure causes, and treatment…
Is The X-Ray Fluorescence Reliable For Gold Detection?
The use of portable X-ray fluorescence across the industry has been remarkable over the past few years. Originally born in the alloy and scrap metal detection industry, the technology was later determined to be effective in environmental field monitoring, particularly contaminated land and remediation work. It can be said that the use of portable XRF in soil science…
