Advanced Functions of DW-GR Series Vertical Autoclave

1. Smart microcomputer control

“Inspiration” high speed microcomputer control, not only to monitor and control the whole process, but also to update the function in the future.

2. Program Memory storage system

User can set their own program, and save it in the system.

3. Calibration interface

Offer temp. and pressure interface, together with the 3Q adapter joints, can insert max 15 sensors one time to do the calibration work

4. Saturated steam monitoring

The system automatically monitors the purge out of cold air to ensure the pure steam environmentk

5. Auto water fill(only for DF, DR models)

Equipped with automatic water feeding function, standard is with 28L water tank at the back to store water, the option is direct water supply by pipe connection from water source while manufacturing.

6. Biosafety function(only for DAS, DFS, DRS)

Use a 0.2 μm PTFE filter packed in housing to ensure that no biohazard aerosols, microorganisms, and viruses are passing out through the filter during exhausting, so as to make sure the biology DAfety of the lab.

7. Monitor of exhaust filter( only for DAS, DFS, DRS)

Exhaust filter is put inside a pressure-resistant housing (stainless steel material) with an extra PT100 temperature sensor to monitor the temperature, so as to make sure the filter and housing are also being sterilized thoroughly, and will not lead to secondary biohazard pollution.

8. SUS316L Stainless steel(Option)

Stronger corrosion, longer service life, and greater pressure resistance.

9. Humanized permission management

The management of the autoclave is classified into 3 levels,user-administrator- engineer, to make sure proper proper usage.

10. Agar program

Can heat up, melt, warm the agar, or be used as a chamber preheating function

11. Waste program

Special waste program to sterilize the waste thoroughly

12. Auto start-up appointment

Can make an appointment in 0- 15 days

13. Fully automatic drying( only for DR models)

Can set drying temp. and drying time. After sterilization, water will be drained out automatically, then an inbuilt pump will supply clean air into the chamber through an air filter.

14. Air filter( only for DR models)

Filtration is higher than 99.99% in particles with a diameter of 0.2 μm.

15. LCD/USB/APP/Smart management system(Option)

• LCD:5 inch LCD screen to show information in words
• USB: to help to store and transfer the sterilization data
• APP: Remote management APP(only in China)
• Smart management system: linked with LIMIS/SCADA system(only in China)

16. Auto drainage(option)/Auto cleaning(only for DF/DR)

Added with a water pump, press the drainage button to start drainage, or set it to timed automatic drainage.

17. Condenser(Option)

Equipped with a professional condenser, the steam generated during the sterilization process is converted into water through the condenser, achieving zero discharge of water vapor/mist.

Safety Features of DW-GR Series Vertical Autoclave

• Humanized design: The lid and bench corners are covered with insulation to avoid getting scalded.
• Interlocking device: The exclusive patented “eight-column evenly distributed” interlock device is safer and more reliable than ordinary interlocking devices.
• Lid closing checking: The Machine can not start if the lid is not locking well by checking mechanically and electrically.
• Real-time monitor: The system will monitor the lid locking, pressure, and temperature status on a real-time basis to guarantee the safe and successful work of the autoclave.
• Cooling lock OPEN temperature: Each program can set different lid OPEN temperatures, especially for the liquid program, so as to prevent the user from opening the lid and causing burns when the articles are still in a high-temperature state
• Triple protection for lack of water: The bottom of the sterilization chamber is equipped with three different dry-burning protection devices: liquid expansion type, copper temperature sensing type, and electric ion type (water level sensor), to avoid misjudgment caused by a single method.
• Double protection for overpressure: Mechanical pressure gauge and electric sensing system, once pressure is abnormal, the system will cut power, release the pressure, and send out an alarm.
• Auto troubleshooting: The system will monitor the working status, and will cut the power, send out an alarm, and report the error information once any abnormal situation is detected safety test function: Regular testing of system security and safety protection measures is possible.
• Electrical protection: Equipped with a highly sensitive electrical protection system, effectively providing leakage protection, overcurrent and short-circuit protection.

Specification Table of DW-GR Series Vertical Autoclave

Model	Standard DW-GR60DA	Standard DW-GR85DA	Standard DW-GR110DA
	Auto water fill DW-GR60DF	Auto water fill DW-GR85DF	Auto water fill DW-GR110DF
	Auto drying DW-GR60DR	Auto drying DW-GR85DR	Auto drying DW-GR110DR
Difference	DW-GR-DA: Fully automatic with fast cooling fan               DW-GR-DF: DW-GR-DA+ automatic water feeding  DW-GR-DR: DW-GR-DF+fully automatic drying function
Capacity(L)	60	85	110
Dimension(L*W*H)(mm)	DA:644x660x980	DA: 644x660x980	DA:644x660x980
	DF/DR:644x831x980	DF/DR:644x831x980	DF/DR: 644x831x1180
Chamber dimension (Dia*H)(mm)	Φ390×505	Φ390×700	Φ390×895
Rated power(W)	2900	4600(2900 as option)	4600
SUS 304 Basket(Dia*H)(mm)(Note 1)	(Φ370×190)x2	(Φ370×280)x2	(Φ370×250)x3
Power requirement	220V±10% 16A 50HZ/60HZ	220V±10% 32A 50HZ/60HZ	220V±10% 32A 50HZ/60HZ
Temperature display accuracy	0.1℃
Working environment	5℃~40℃  relative humidity ≤85%
Chamber material	SUS304 stainless steel
Sterilization temp.range	105℃~138℃
Sterilization time range	1~6000 min
Melting temp. range	60℃~115℃
Melting time	1-6000 min
Warming temp	45℃~79℃
Warming time	1~9999 min
Drying(only for DR)	Drying time:1~300 min Drying temp:80~160℃
Cooling lock OPEN temp.range	40℃~99℃ for solid, waste, agar, self-defined 40℃~80℃(note 2)for liquid
Sterilization mode	Liquid, Liquid with warming, solid, Wrapped instrument, Fabric, Rubber, Fast, Waste, Agar, Self-defined
Program number saved	DA: 20 programs   DF/DR: 60 programs
Exhaust speed control	Fully automatic internal discharging with 6 levels choice
Lid open way	Flip open(up and down)
Water tank	DA:2 water tanks to collect steamDF:l water storage tank more than DADR:1 water tank to collect steam+1 water storage tank (note 3)
Appointment timer range	(Auto start up appointment)0～15 days
Pressure gauge range	0.1~0.5MPa
Pressure valve set pressure	0.29 Mpa
Controller	“Inspiration” smart microcomputer controller
Safety Device	Eight column evenly distributed “interlock device electric double inter bock lid closing checking dry scorch protection. age), cooling lock, anti-scald lid and bench corner, automatic troubleshooting
Biosafety function	Option for 0.2um biosafety filter(basic model+S)

• Note 1:Baskets can also be customized
• Note 2:Cooling lock OPEN temp. is related to local boiling point
• Note3:Optional sewer drainage for DR while manufacturing

Spare part option of DW-GR Series Vertical Autoclave

Display of DW-GR Series Vertical Autoclave