Cond+ Pocket Cond/TDS/Sal/Res Tester, Bluetooth Series
Cond+ Pocket Cond/TDS/Sal/Res tester（multi-parameter meter）can simultaneously measure the pH, conductivity, TDS, salinity, resistivity, and temperature altogether. It has an IP67 waterproof design and supports Bluetooth connection.
Drawell’s PH/Conductivity/Dissolved Oxygen Meter can used for soil measurements in agriculture, water quality for municipal water supplies, environmental remediation, pharmaceuticals, food, industry, electric power, scientific research, etc.
Features of Cond+ Pocket Tester
- The tester can measure conductivity, TDS, salinity, resistivity, and temperature altogether.
- Cloud-based data management system – allows you to record, manage and share your test data at your finger tip, never worry about data loss.
- Comprehensive Information Display – 4 types of measurement display modes to fit in different situations.
- The product can be used as a classic tester even without connecting to a smart phone.
- Ability to add sample name, operator name in every data set.
- Probe Replaceable, high cost-performance.
- IP rating: IP67.
Specifications of Cond+ Pocket Tester
| Conductivity | Range | 0 to 199.9μS/cm, 200 to 1999μS/cm, 2.0 to 20.00mS/cm |
| Resolution | 0.1/1μS/cm, 0.01 mS/cm | |
| Accuracy | ±1.0% F.S±1digit | |
| Calibration Points | 1 point | |
| TDS | Range | 0.1 ppm to 10.00 ppt |
| TDS Factor | 0.40 to 1.00 | |
| Salinity | Range | 0-10ppt |
| Resistivity | Range | 50Ω·cm to 20MΩ·cm |
| Temperature | Range | 0 to 50˚C (32-122˚F) |
| Accuracy | ±0.2˚C | |
| Packing including | Meter (Probe and 4×1.5V AAA alkaline batteries preinstalled) Standard Cond solution: 30mL: 1413μS/12.88mS/cm one for each Sample Vials: 2pcs Lanyard: 1pc Hard carrying case: 1pc | |
Bluetooth Pocket Cond+ Meter Test Display
