Application Range

Horizontal flow work bench noise is compared small, so it is usually used in the electronic industry, which has little effect on health.

Horizontal laminar flow is widely used in electronics, national defense, precision instruments, meters, pharmaceutical industries, etc.

Characteristics

• The whole equipment adopts cold-rolled plate welding, and the surface is electrostatically sprayed. Its worktop is stainless steel 304.
• The air supply mode of the equipment is divided into vertical air supply and horizontal air supply, quasi-closed glass damper, which is easy to operate.
• Small and exquisite, it can be freely placed on the general workbench for operation, which is convenient for small studios.
• The fan system is controlled by a remote switch with fast and slow dual speeds to ensure that the wind speed in the work area is always in an ideal state.

Technical Parameters

Model	HD-650
Clean grade	Grade 100(209 E U.S. Federal)
Number of bacteria	≤ 0.5 per utensil.hour(90mm utensil)
Noise	≤62dB
Power	220V/50HZ
wind speed	0.25-0.45m/s
illumination	≥300LX
Working area dimension(W*D*H)	490×350×490mm
Overall dimension(W*D*H)	650×530×850mm
HEPA filter size and quantity	470×455×38×①
Fluorescent/UV lamp specifications and quantity	5W×①/10W×①

Technical Parameters

Model	HD-850
Clean grade	Grade 100(209 E U.S. Federal)
Number of bacteria	≤ 0.5 per utensil.hour(90mm utensil)
Noise	≤62dB
Power	220V/50HZ
wind speed	0.25-0.45m/s
illumination	≥300LX
Working area dimension(W*D*H)	690×350×490mm
Overall dimension(W*D*H)	850×530×850mm
HEPA filter size and quantity	670×455×38×①
Fluorescent/UV lamp specifications and quantity	12W×①/20W×①